2018-01-29[2.4B] 1. Patch KRACK issue 2. Support a new AT command(ATV2): print IP/PORT when TCP is connected 3. Support the software flow control(Xon/Xoff) 4. Support RFC3168: disable ECN 5. Improve GARP(Gratuitous ARP) mechanism: 4 times > 11 times 6. Fix some minor bugs 2016-03-25[2.4A] 1. Add default password for telnet console. 2. Fix bugs about handling telnet sub-option and password. 2015-12-11[2.3B] 1. Change DNS source port(53 to a random value between 4096 ~ 65535) 2. Improve UI of web configuration 3. Fix a bug about region code 2015-01-16[2.3A] 1. Add control logic for USB dongle (M83 only) 2. Fix bugs about RFC2217, DHCP and SoftAP 3. Improve RFC2217 and DHCP function 4. Support separator function in UDP mode 2013-05-30[2.2B] 1. Support CSW-M83 - Support RT5370/RT5390/RT3572(B/G) chipset 2. Fix a bug about TXDE in RS485 3. Fix a bug about DNS query 2013-03-15[2.2A] 1. Fix a bug about using an invalid IP address 2. Fix a bug about AT command 3. Fix a bug about hidden ssid 4. Improve performance of softap 5. Support sd command in telnet 2012-10-16[2.1C] 1. Support Contry Region setting 2. Add Web configuration 3. Fix a bug about DNS in UDP mode 2012-08-24[2.1B] 1. Soft-AP bug fix 2012-07-27[2.1A] 1. Support WPA-Enterprise (EAP-TLS,TTLS,PEAP) 2. Support IPv6 3. Add Soft AP function 4. Add delimiter function 2012-05-10[2.0A] 1. Improve speed for establishing a Wi-Fi link - About 14 seconds 4 seconds (Ver. 1.1A 2.0A) 2. Simplicity of configuring Wi-Fi security options - Options such as WPA/WPA2, TKIP/AES and etc. are automatically selected. 3. Improve performance of Ad-hoc network 4. Improve performance of roaming 5. Add advanced configuration for PHY - PHY mode, Long/Short Preamble, long/Short Slot and CTS Protection 6. Change specification of WLAN mode(802.11b/g/n -> 802.11b/g) 2012-01-11[1.1A] 1. Support H/W Factory Reset function 2. Support RSSI indication by LED 3. Support 63Bytes passphrase for WPA-PSK/WPA2-PSK 4. Support AT commands for Wi-Fi configuration 2011-11-03[1.0D] - CSW-M85 support - flow-control RTS bug fix - RS485 support - at+pwp reset bug fix - ati3 message bug fix - add at+prst command - boot code UART1 hang-up bug fix - add firmware name in status FIRMWARE VERSION field - RS-422 RTS output high - remove WPA/WPA2 -> TKIP/AES dependency 2011-07-26[1.0C] 1. TCP# pin bug fix 2. SCFG writing new field allowed 3. SCFG multiple command support 4. SCFG add K(check) command 5. SCFG check code/id/length field of writing frame 6. PPPoE align bug fix at debugging code 7. telnet password mismatch bug fix 8. U2S water mark bug fix 9. telcom RTS/DTR/CTS pin bug fix 10. variable FIFO interrupt interval 11. add product ID M85 12. SCFG corrupted frame bug fix 13. TCP fast retransmit bug fix 14. ATC ESC character bug fix 15. parse DDNS response contents 16. add ddns state field to ezManager status 17. add mac address field to ezManager status 2011-01-03[1.0A] 1. Initial Release